34
OK
Press
and
OK
Press
and
Press
/
to select among 5, 6 and 7.
OK
Press
to confirm.
10.6.7.3 Set the ring delay
Press
and
OK
Press
and
OK
Press
and
Press
/
to select among "0 RING", 2" RINGS", "3 RINGS", to "9
RINGS", nine options are available in total.
Note:
If 0 RING is selected, the manual mode will be enabled.
10.6.8
Set the PBX access code (Optional)
Press
and
OK
Press
and
OK
Press
and then enter the PBX access code. Only one digit can be
entered.
OK
Press
to confirm.
10.6.9
Set the area code (Optional)
Press
and
OK
Press
and
OK
Press
and then enter the area code. Only three digits in maximum
can be entered.
OK
Press
to confirm.
10.6.10
Set the carrier code (Optional)
Press
and
OK
Press
and
OK
Press
and then enter the carrier code. Only three digits in maximum
can be entered.
OK
Press
to confirm.
10.7
Registration
Your handset and base station is pre-registered. Up to five handsets can
be registered to a single base station.
/
to select "RCID".
/
to select "NUM LEN".
/
to select "BS SET".
/
to select "RCID".
/
to select "RINGS".
/
to select "BS SET".
/
to select "PBX CODE."
/
to select "BS SET".
/
to select "AREA COD".
/
to select "BS SET".
/
to select "CARR COD".