Nitsuko Multibutton Telephone Feature Handbook page 64

Speed Dial
To program a name for a
Speed Dial number (when
your display shows PROGM
NAME Y/N ?):
56
Dial Personal Speed Dial bin number (50-
3.
59, 20-29), press Speed Dial bin key (1-
16), or press One-Touch Speed Dial key.
-Your display shows, "LINE
[01-nn,9X]."
-If you are an attendant, you cannot use
this procedure to store numbers in
One-Touch Speed Dial keys.
-Your first Personal Speed Dial key is
bin 50; your last is bin 29.
-If your display shows, "PROGM NAME
Y/N," see instructions below for name
programming.
Dial line number (e.g., 01), press line key
4.
or press ICM (to store an Intercom feature).
-You may also be able to dial a line
group code (9, or 90-98) or press a
loop key.
-If you are storing an outside number,
your display shows, "TEL NUMBER."
-If you are storing a feature code, your
display shows, "ENTER FEAT. CODE."
Dial number.
5.
-To enter a pause, press HOLD. To enter
a Flash, press MSG. To enter a Delay,
press DIAL.
-For example, to have the system dial 9,
pause and then dial 926 5400, enter: 9
(HOLD) 9265400.
Hang up.
6.
Press Y to program the name, N to leave
1.
the name as it is.
-If you press Y, the display shows the
current name.
Dial the first letter of the desired name.
2.