Status Message TransmSsOn; PrNter ConnectOn; EncryptOn FunctOn; Idas Operation - Icom IC-F3160 SERIES Operating Manual

5

IDAS OPERATION

■ Status message transmission
The status message can be transmtted automatcally.
The status message s transmtted when;
• The transcever s turned ON or OFF
- Set the status message to be transmtted n 'Power ON Status'
or 'Power OFF Status' tem, respectvely.
- Set the target staton ID n 'Power Status ID'.
• After sendng a voce message
- Set the 'Send wth Voce Call' tem as 'Enable.'
- Set the status message to be transmtted n 'Send Status
Number' tem.
■ Printer connection
When the optonal OPC-966
to the transcever, a prnter can be connected to prnt out the
receved SDM content and the ID of the staton who sent the
message.
Ask your dealer or system operator for connecton detals.
41
s connected
interface cable
■ Encryption function
The encrypton functon enables voce scramblng, whch
provdes prvate dgtal communcaton between statons.
q Push [Scrambler/Encryption] to turn the encrypton
functon ON.
• " " appears.
w Push [Scrambler/Encryption] agan to turn the encryp-
ton functon OFF.
• " " dsappears.