Installing The Calibration Application - Kodak D4000 User Manual

Installing the Calibration Application

November 2011
If your computer does not have a sound card and/or speakers, or
you are running a 64-bit Operating System, when you are
prompted to 'wait for the beep' during the instrumented
calibration:
1. Wait for the light below the reading probe of the X-RITE i1PRO
device to illuminate.
2. Hold the button for 3 seconds and then begin scanning the
strip on the calibration target.
If you try to scan a strip before the lamp has
IMPORTANT:
stabilized, an error appears indicating an incorrect
number of patches were read. If this error occurs,
re-scan the strip after holding the button for 3
seconds prior to starting the scan.
Before installing the software:
IMPORTANT:
• Have .NET FRAMEWORK 4 installed.
• Have "Administrator" privileges.
If your system has an older version of calibration software
(KODAK Visual Printer Calibration Utility) installed, the installer
configures the Visual Calibration Utility to launch the new
Calibration Application.
1. Go to www.kodak.com/go/ enter your printer model number
For example: www.kodak.com/go/D4000
NOTE: Valid printer models are: D4000, 8810, 8800, 7000,
7010, 7015, 6800, 6850, and 605
2. Select the Standalone Printer tab.
3. Select the Technical Resources link for your printer model and
download the KODAK Photo Printer Calibration Application
for WINDOWS.
4. Locate the file that you downloaded to your hard drive and
double-click the file.
5. When the WinZip Self-Extractor screen appears, browse to a
folder location that is easy to access, such as your computer's
desktop. Click Unzip.
An Installer folder is created containing all of the files.
6. Double-click the Installer folder.
7. Double-click the setup.exe file.
NOTE: The installer checks to see if you have .NET FRAMEWORK
4 installed. If it is not installed, you are prompted to
download it from the MICROSOFT Web site and install it.
When the .NET FRAMEWORK 4 installation is complete,
you return to the Calibration Application installer.
Getting Started
1-3