Using the Calibration Application
3-4
5. Determine which patch on Side B matches the patch selected
for Side A.
6. Click the arrows to enter the patch number for Side B that
corresponds with the most neutral patch selected on Side A.
7. If it is necessary to make the overall prints lighter or darker,
make a selection from the drop-down menu to adjust the
highlights.
NOTE: Only do this step if you want to adjust the highlights so
that your prints meet your personal preference. After
adjusting the highlights, check your prints to make sure
that they look the way you want.
8. Click Update Printer Calibration.
The calibration application calculates and downloads a new
calibration table and updates any adjustment you made to the
highlights.
9. Calibration is complete. Click Yes if you would like to verify
the calibration on the same printer, or calibrate another
printer. Click No to exit the Calibration Application.
November 2011