Table of Contents
Advertisement
Using the Calibration Application
3-2
The printer prints a calibration target.
3. Determine the most neutral gray patch on the calibration
target.
4. Click the arrows to enter the patch number that corresponds
with the most neutral patch on the calibration target.
5. If it is necessary to make your overall prints lighter or darker,
make a selection from the drop-down menu to adjust the
highlights.
NOTE: Only do this step if you want to adjust the highlights so
that your prints meet your personal preference. After
adjusting the highlights, check your prints to make sure
that they look the way you want.
6. Click Update Printer Calibration.
The calibration application calculates and downloads a new
calibration table and updates any adjustment you made to the
highlights.
7. Calibration is complete. Click Yes if you would like to verify
the calibration on the same printer, or calibrate another
printer. Click No to exit the Calibration Application.
November 2011
Advertisement
Table of Contents
