November 2011
The status appears on the screen.
13. Repeat Steps
7-12
calibration target.
14. Secure the calibration target into the tray clip of the X-RITE
i1PRO scanning tray with Side B up.
15. Repeat Steps
7-12
When all of the rows of patches are successfully read, the new
calibration table is automatically generated and sent to the
printer.
16. Calibration is complete. Click Yes if you would like to calibrate
another printer. Click No to exit the Calibration Application.
Using the Calibration Application
for each row of patches on Side A of the
for the additional Side B target strips.
3-9