Description Of The Parts; Front Panel - urmet domus 1093 User Manual

2

DESCRIPTION OF THE PARTS

There are numerous ways to navigate and operate your DVR. You may use the Front Panel Controls, the included IR
(Infra-Red) Remote, a Mouse and the Soft Keyboard.
2.1

FRONT PANEL

4
2
3
Figure 1. DVR Front Panel Controls
The controls on the front panel include:
Power Button: Powers DVR on/off.
1.
IR Receiver: Receiver for IR remote.
2.
USB Ports: Universal Serial Bus (USB) ports for additional devices such as USB mouse and USB Hard
3.
Disk Drive (HDD).
Status Indicators: Status indicators for different features of the DVR.
4.
• Alarm: Alarm indicator turns red when a sensor alarm is detected.
• Ready: Ready indicator turns blue when DVR is functioning properly.
• Status: Status indicator turns blue when DVR is controlled by an IR remote. Indicator turns red when
controlled by a keyboard and purple when IR remote and keyboard is used at the same time.
HDD: HDD indicator blinks red when data is being read from or written to HDD.
•
Modem: Reserved
•
TX/RX: TX/RX indictor blinks blue when network connection is functioning properly.
•
Guard: Guard indicator turns blue when the device is armed, off when the device is unarmed. The
•
arm/disarm state can be initiated by pressing and holding on the ESC button for more than 3 seconds in
Preview mode.
5. Alphanumeric Buttons: Alphanumeric buttons used in various menus of the DVR. Some uses include:
Switching to the corresponding channel in Preview or PTZ Control mode.
•
Inputting numbers and characters in Edit mode.
•
Switching between different channels in Playback mode.
•
6. Control Buttons:
ESC Button: The ESC button is used to escape to the previous menu and to arm/disarm the DVR in
•
Preview mode.
• REC/SHOT Button: The REC/SHOT button is used to enter the Manual Record interface. If used when
controlling a PTZ, pressing the REC/SHOT button and then a Numeric button will call a PTZ preset.
PLAY/AUTO Button: The PLAY/AUTO button is used to enter the Playback menu. It is also used to turn
•
audio on/off in the Playback menu and auto scan in the PTZ Control menu.
ZOOM+ Button: The ZOOM+ button is used to zoom the PTZ camera in when in the PTZ Control menu.
•
A/FOCUS+ Button: The A/FOCUS+ button is used to adjust focus in the PTZ Control menu. It is also
•
used to switch between input methods (upper and lowercase alphabet, symbols and numeric input). It
can also be used to clear entire masked areas, such as in the Motion Detection and Privacy Mask
menus.
EDIT/IRIS+ Button: The EDIT/IRIS+ button is used to edit text fields. When editing text fields, it will also
•
function as a Backspace button to delete the character in front of the cursor. On checkbox fields,
pressing the EDIT/IRIS+ button will tick the checkbox. In PTZ Control mode, the EDIT/IRIS+ button
opens up the iris of the camera. In Playback mode, it can be used to generate video clips for backup.
DS1093-059
5
8 6
9
1
7