Installing a hard disk drive
►
Open the casing (see "Opening the casing").
►
Take the new hard disk drive out of its packaging.
►
Make the required settings (e.g. master/slave, cable select) on the drives.
►
Connect the cables to the hard disk drive.
►
Close the casing (see "Closing the casing").
i
It may be necessary to modify the entry for the drive in the BIOS Setup.
A26361-K678-Z121-1-7619, edition 1
2
1
►
Slide the hard disk drive into the second
bay in the direction of the arrow (1).
►
Screw the new hard disk drive firmly onto
the drive cage with the included four
screws (2).
System expansions
45