Fujitsu Siemens Computers SCENIC Edition X100 Operating Manual page 51

Installing a hard disk drive
► Take the new hard disk drive out of its packaging.
► Make the required settings (e.g. master/slave, cable select) on the drives.
► Connect the cables to the hard disk drive.
2
1
► Close the casing (see "Closing the casing").
It may be necessary to modify the entry for the drive in the BIOS Setup.
i
EasyChange rails for a second hard disk drive are mounted on the drive cage.
A26361-K678-Z121-1-7619, edition 1
►
1
► Secure the EasyChange rails on the side of
the hard disk by inserting the upper pins of
the EasyChange rail in the corresponding
holes of the hard disk.
Press the EasyChange rails mounted on the hard
disk drive together somewhat (1) and slide the
hard disk drive into the case in the direction of the
arrow (2).
System expansions
43