Configuration Mode - NCI 6720 User Manual

Configuration Mode

26. When you are finished, press the ZERO key,
until DONE is displayed, then press the
TEST key to return to the top menu level...
DIAG is displayed. Or close Switch 1 to
return to normal weighing mode.
The Configuration (CONF) Mode menu allows
scale configuration for your specific application
needs. The items you can configure are as
follows:
FILTERING (FILT) – Choose between FAST and
SLO filtering. SLO should be chosen in areas
susceptible to vibration. Choose FAST filtering
for more stable conditions.
Baud (BAUD) – Choose a baud and parity from
Table 2.
Protocol (PROT) – Select the RS-232 communi-
cation protocol.
NCI – NCI standard
ECR – Cash register compatible
8213 – 8213 compatible (Sharp)
2250 – 2250 compatible (Swintec)
34-F – 34-MF compatible (Sweda-Mexico)
ATT – AT&T compatible
o4000 – Olympia Cash Register compatible
Access the Menu mode as shown in Figure 3.
1. From the DIAG display, press the ZERO key
until CONF is displayed, or from the normal
weighing mode, move Switch 1 to the Menu
mode or the OPEN position; then press the
ZERO key until CONF is displayed.
Model 6700 Family User's Manual
17