NCI 6720 User Manual page 18

18
Model 6700 Family User's Manual
2. Press the TEST key...
FILT is displayed.
3. Press the TEST key...
The current setting, FAST or SLO,
is displayed.
4. Use the ZERO key to toggle between the two
choices. Press the TEST key when the
choice you want is displayed. The choice is
accepted and the display shows the FILT
item.
5. Press the ZERO key...
BAUD is displayed.
6. Press the TEST key...
The current baud and parity choice is
displayed.
7. Use the ZERO key to scroll the choices
found in Table 2. When the choice you want
is displayed, press the TEST key. The choice
is accepted, and the display shows the BAUD
item.
8. Press the ZERO key until...
PROT is displayed.
9. Press the TEST key...
The current RS-232 communication
protocol is displayed.
10. Press the ZERO key to scroll through the
choices. When the choice you want is
displayed, press the TEST key. The choice is
accepted and the display shows the PROT
item.