NCI 6720 User Manual page 16

16
Model 6700 Family User's Manual
18. Press the ZERO key...
FILT is displayed. This stands for filter-
ing.
19. Press the TEST key...
The current filter setting, FAST or SLO,
is displayed.
18. Press the ZERO key...
PROT is displayed. This stands for
protocol.
19. Press the TEST key...
The current serial protocol selection is
displayed.
20. Press the ZERO key...
BAUD is displayed. This stands for baud
rate.
21. Press the TEST key...
The current baud rate and parity selec-
tion is displayed.
22. Press the ZERO key...
CAP is displayed. This stands for capac-
ity.
23. Press the TEST key...
The current capacity/resolution selection
is displayed.
24. Press the ZERO key...
UNITS is displayed. This stands for unit-
of-measure.
25. Press the TEST key.
The current unit-of-measure LBS (for
pounds) or 1000G (for kilograms), is
displayed.