Restoring Factory Defaults; Problems With Time And Date Settings - Thecus N0204 miniNAS User Manual

1. The network folder is currently mapped using a different user name and password. To
connect using a different user name and password, first disconnect any existing mappings
to this network share.
2. The mapped network drive could not be created because the following error has occurred:
Multiple connections to a server or shared resource by the same user, using
more than one user name, are not allowed. Disconnect all previous connections to
the server or shared resource and try again.
To check out existing network connections, type net use under the DOS prompt. You
may refer the URL below for more network mapping information:
http://esupport.thecus.com/support/index.php?_m=downloads&_a=viewdownload&downl
oaditemid=57&nav=0

Restoring Factory Defaults

From the System menu, choose the
Factory Default item and the Reset to
Factory Default screen appears. Press
Apply to reset the N0204 miniNAS to
factory default settings.
WARNING
Resetting to factory defaults will not
erase the data stored in the hard disks,
but WILL revert all the settings to the
factory default values.

Problems with Time and Date Settings

The administrator is able to select an NTP Ser
synchronized. However, if the N0204 mini
encounter a problem when setting the Time an
1. Login to the Web Administration Interface.
2. Navigate to System > Time.
3. Under NTP Server, select No.
4. Set the Date, Time, and Time Zone.
5. Click Apply.
In addition, if the N0204 miniNAS is able to ac
NTP Server clock.isc.org by default, please make sure
thereby allowing the NTP Server na
Server)
ver to keep the N0204 miniNAS's time
NAS can not access the Internet, you may
d Time Zone. If this happens:
cess the Internet and you want to keep the
the DNS Server is correctly entered,
me to correctly resolve. (See Network > LAN > DNS
79