Network Management; Lan Configuration - Thecus N0204 miniNAS User Manual

Access Control List
Item
Deny
Read Only
Writable
Remove
Submit
Reset
To configure folder access, follow the steps below:
1. On the ACL screen, all network groups and users are listed in the left hand column.
Select a group or user from this list.
2. With the group or user selected, press one of the buttons from the three access level
columns at the top. The group or user then appears in that column and has that level
of access to the folder.
3. Continue selecting groups and users and assigning them access levels using the
column buttons.
4. To remove a group or user from an access level column, press the Remove button in
that column.
5. When you are finished, press Submit to submit and confirm your ACL settings.

Network Management

Use the Network menu to make network configuration settings as well as service support
settings.

LAN Configuration

From the Network menu, choose LAN, and the LAN Configuration screen appears. This
screen displays the network parameters of the LAN connection. You may change any of these
items and press Apply to confirm your settings. See a description of each item in the
following table:
Description
Denies access to users or groups who are displayed in this column.
Provides Read Only access to users or groups who are displayed in this
column.
Provides Write access to users or groups who are displayed in this
column.
Removes the selected user or group from the column in order to reset
their access privileges.
Submits and confirms settings.
Cancel your settings and return to the Folder screen.
28