Raid Information; Raid Configuration; Raid Level - Thecus N0204 miniNAS User Manual

USB Information
Item
Disk No.
Capacity (MB)
Model
Firmware
Status
Refresh

RAID Information

From the Storage menu, choose the RAID
item and the RAID Information screen
appears.
This screen lists the RAID volume currently
residing on the N0204 miniNAS. From this
screen, you can get information about the
status of your RAID volume, as well as the
status, used percentage, and stripe size.
To configure your RAID settings, press the
Config button to go to the RAID
Configuration screen.
RAID Information
Item

RAID Level

Total Capacity
Status
Used Percentage
Stripe Size
Remaining Time
Config

RAID Configuration

On the RAID List screen, press the RAID Config button to go to the RAID Configuration
screen. In addition to RAID disk information and status, this screen lets you make RAID
configuration settings.
For more information on RAID, see
Appendix C: RAID
RAID Level
You can set the storage volume as JBOD,
RAID 0, or RAID 1, RAID configuration is
usually required only when you first set up
the device. A brief description of each
RAID setting follows:
Description
Number assigned to each USB disk.
Shows the capacities of each USB disk in megabytes (MB).
Displays the model names of each USB disk.
Shows the firmware version of each USB disk.
Shows the status of each USB disk. An Eject button appears beside each
USB disk. Press this button before removing the USB disk.
Press Refresh to rescan the status of the USB disks.
Description
Shows the current RAID configuration.
Total capacity of the current RAID.
Indicates status of the RAID. Can read either Healthy, Degraded, or
Damaged.
Indicates total percentage used of the RAID volume.
Indicates the current stripe size being used.
Indicates the time remaining until the RAID volume is built.
Press this to configure RAID volumes.
Basics.
24