Part Iii - Setting Up Virtual Servers (Https); Firewall Software Configuration; Replacing Damaged Hard Drives; Hard Drive Damage - Thecus N0204 miniNAS User Manual

Hide thumbs Also See for N0204 miniNAS:
Table of Contents

Advertisement

3. Select www.dyndns.org.
4. Go to router setup screen, and enter the following information:
a. User Name or E-mail Address: xxx@example.com
b. Password or DDNS Key: xxxx
c. Host Name: www.N0204-miniNAS.dyndns.org
d. Enable wildcard? Select Yes
e. Update Manually: Click Update

Part III - Setting up Virtual Servers (HTTPS)

1. Navigate to NAT Setting > Virtual Server.
2. For Enable Virtual Server?, select Yes
3. Setup the HTTPS Server
a. Well-Known Applications: Select User Defined
b. Local IP: Enter: N0204 miniNAS IP address, eg. 192.168.1.100
c. Port Range: 443 (the default HTTPS port setting on the N0204 miniNAS)
d. Protocol: select TCP
e. Click Add.
f.
Click Apply.
4. Test the HTTPS connection from another computer on the Internet.
a. From a remote computer, open your browser and enter:
https://www.N0204-miniNAS.dyndns.org
b. You should see the login page of N0204 miniNAS.

Firewall Software Configuration

If you are using a software firewall (i.e. Norton Internet Security) and are having trouble
connecting to the N0204 miniNAS, you can try the following steps:
1. Double click the NIS icon on system tray, and then configure the Personal Firewall.
2. On the Programs page, find the SetupWizard.exe and change its permission to
"Permit All". If it's not in the program list, use the Add or Program Scan buttons to
find it.
3. On the Networking page, manually add N0204 miniNAS IP address (i.e.
192.168.1.100) to the Trusted list.

Replacing Damaged Hard Drives

If you are using RAID 1, you can easily replace a damaged hard drive in the Thecus N0204
miniNAS while keeping your data secure with the system's automatic data recovery.

Hard Drive Damage

When a hard drive is damaged, LED will be become solid RED.

Replacing a Hard Drive

To replace a hard disk drive in the N0204 miniNAS:
1. Remove the tray with the damaged hard disk.
2. Insert the hard disk tray then slide into the N0204 miniNAS until it snaps into place.
75

Advertisement

Table of Contents
loading

Table of Contents