Attaching The Ferrite Cores - Fujitsu Plasmavision P63XHA70W User Manual

ATTACHING THE FERRITE CORES

• The ferrite cores are used to reduce noise. Attach them correctly as shown in the following illustrations.
• Carefully check the terminals for position and type before making any connections.
Large ferrite core A (5)
When connecting the cable to S-video input terminal and HDMI input
terminal (4), attach one of these large ferrite cores A to the cable near
the terminal.
Large ferrite core B (1)
When connecting the power cord to the power input terminal, attach large ferrite core B near the terminal of the power cord as shown
below.
Ferrite core
(1) Attach large ferrite core B to the power
cord.
Small ferrite core (2)
When connecting a cable to the external speaker output terminal,
attach one of these ferrite cores to the cable near the terminal.
Note
• The external view is meant to be a representation of the actual unit and is not to scale; therefore, it may differ from the actual shape and size of the product.
• Due to the fragile and highly precise equipment, it is very important to pack properly before transportation using only the packing materials provided.
Reference
See P. E-31 for more information on options.
Wire clamper
(2) Pass the wire clamper through the
hole.
Ferrite core
HDMI
S-video
Cable
Cable
Ferrite
Ferrite
core
(3) Wrap the wire clamper around the
power cord and fasten securely.
Ferrite core
core
E-5