Adjusting The Volume; Convenient Functions; On-Screen Information; Picture Mode - Fujitsu Plasmavision P63XHA70W User Manual

BASIC OPERATIONS (Continued)

ADJUSTING THE VOLUME

* You can also use the buttons on
the display's control panel to
perform these steps.

CONVENIENT FUNCTIONS

Note
• Some functions are not available depending on the state or condition of use.
E-14
Adjusting the volume
Press to increase the volume.
Press to reduce the volume.
* Note that the volume level remains stored even when you
turn OFF the power.
Muting the audio
Press .
The audio is removed.
Press again to restore the audio to the original level.
* The mute mode can also be released by pressing the volume buttons.

On-screen information

Press .
The mode is indicated on the screen for 5 seconds.

Picture Mode

Press .
This button can be used to switch the picture mode.
In the picture mode, you can switch between the set status and the fine mode.
* For the picture mode settings, see "Picture Mode (P. E-20)".

Picture Memory

Press .
This button can be used to recall the settings of the picture memories 1 – 8. Each time this button is
pressed, the setting changes as follows.
Memory1 Memory2
Memory7 Memory8
* For the picture memory settings, see "Picture Memory (P. E-20)".
When the volume adjustment button is
pressed
Memory3 Memory4 Memory5 Memory6