Vcr/Pc - Fujitsu Plasmavision P63XHA70W User Manual

CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (CONTINUED)

VCR/PC

• Connect the video signal cable to either the S-video input terminal or the video input terminal.
• If the unit to be connected is equipped with S-video output terminal, it is recommended to connect to the S-video terminal.
• As the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase.
To video output
To S-video output
To audio outputs
Note
• Be sure to turn off power of the plasma display and external equipment before making any connections.
Loose connectors can result in picture or color problems. Make sure that all connectors are securely inserted into their terminals.
•
• Also refer to the instructions for the component to be connected.
• When inputting audio, connect to the terminals corresponding to the used video input or RGB input.
E-12
To audio
inputs
To S-video
To audio inputs
input
Display bottom
To audio output
To RGB output
(mD-sub)
To RGB input
(mD-sub)
To video
input