Attaching The Cables; Adjusting The Picture - Fujitsu FA-156WB-MP Service Manual

15.6"W LCD Color Monitor
The Auto Adjustment function is used to optimized the HPos, VPos, Clock and Focus.
OSD Lock Function: To lock the OSD, press and hold the MENU button while the monitor is off and then press
power button to turn the monitor on. To un-lock the OSD - press and hold the MENU button while the monitor is off
and then press power button to turn the monitor on.

3.2 Attaching the Cables

Cable Connections on back of Monitor
Connecting Cables
Connecting the Signal Cable: Plug one end of the 15-pin signal cable's into the back of the monitor. The other end
plugs into the computer's VGA port.
Connecting the Power Cord: Plug the AC-power cord one end to LCD monitor's AC input socket, the other end to
Wall outlet.
Caution: If the AC outlet is not grounded (with three holes), install the proper grounding adapter (not supplied).

3.3 Adjusting the Picture

1. Press the MENU-button to activate the OSD window.
2. Press - or + to navigate through the functions. Once the desired function is highlighted, press the MENU-button to
activate it. If the function selected has a sub-menu, press - or + again to navigate through the sub-menu functions.
Once the desired function is highlighted, press MENU-button to activate it.
3. Press - or + to change the settings of the selected function.
4. To exit and save, select the exit function. If you want to adjust any other function, repeat steps 2-3.
1. Power input socket
2. Signal input socket
3. Audio Cable
7
Fujitsu FA-156WB-MP