Table of Contents
Advertisement
PART NAMES AND FUNCTIONS
DISPLAY SECTION – FRONT
Warning
If the power indicator lamp flashes red or green, this signifies that the plasma display has developed a problem. When this happens, be sure to remove
the power plug from the receptacle and contact your dealer. In this circumstance, leaving the plasma display power ON can result in fire or electric
shock.
E-6
Input mode selection button
Switches the input modes (Video mode and RGB mode).
Volume button
Adjusts the sound volume.
Wide screen selection button
Switches the screen over to a desired wide screen.
Power indicator lamp
This lamp shows the state of the power supply.
Lit (red):
Standby state
Lit (green):
Power ON state
Flashing (red or green):
Malfunction (Flashes differently
depending on the type of malfunction.)
ON/OFF button
Turns the power "ON" and "OFF (standby state)".
Remote control signal receiver
Receives the signals from the remote control.
Ambient Sensor
Detects the brightness of ambient light.
It is important not to obstruct it for full functionality of the feature.
Advertisement
Table of Contents
