Direct Setting; Code Setting; White Screen; Background - Fujitsu Plasmavision P63XHA70W User Manual

Wide plasma display
Table of Contents

Advertisement

Min.
Std.
Max.
[Min.]: Pattern moves in small range. (About 5 pixels)
[Std.]: Pattern moves in moderate range. (About 10 pixels)
[Max.]: Pattern moves in wide range. (About 15 pixels)
(6) Press
to store.
* When the Screen Orbiter function is operated, some screen contents at the top, bottom, right or left of the screen may move
offscreen.
Direct Setting (for RGB)
You can use this option to switch the setting for RGB input signal.
Each time you press
or
Auto
VGA
WVGA
[Auto]:
The optimum display is obtained automatically for input signals.
[Others]: The optimum resolution setting is fixed for each signal.
Press
to store.
* In Auto mode, the resolution of VGA, WVGA, 480P, XGA, WXGA, SXGA and SXGA+ may not be automatically distinguished.
Switch to the fixed display when the image is not displayed properly.
* Signals that are not applicable depending on the model or input terminals may not be displayed.
Code Setting (for RGB)
Normally, use this option in Auto mode.

White Screen

You can use this option to display white over the entire screen to minimize phosphor burn-in.
Each time you press
or
Off
On
Press
to store.

Background

When the screen size was set to "Normal", to reduce "burn-in", the brightness of the part at which left and right images are not displayed
can be set. Normally, we recommend that "Light Gray" be used.
Each time you press
or
Black
Dark Gray
Press
to store.
* Burn-in can still occur if the Normal mode is shown for extended periods.

Information

Displays system operation status.
Select "Information" and press
The "Information" screen will appear.
[Mode]:
Input mode appears at the upper right corner of the screen
[Freq. Scan Mode]: Frequency scanning
[Input Signal]:
Video mode
[Input Sync]:
Signal type
[Freq.]:
Synchronized signal frequency, polarity
[Preset No.]:
RGB code number
Note
• If the operation is not executed for about 60 seconds, the menu disappears.
• Some functions are not available depending on the state or condition of use.
• The adjustment range varies according to the display signals. Make adjustments to your preferred picture quality within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
, one of the available choices appears in the following sequence:
480P
XGA
WXGA
, one of the available choices appears in the following sequence:
, the settings is switched.
Light Gray
.
SXGA
SXGA+
Information screen
(Video Mode)
E-29

Advertisement

Table of Contents
loading

Table of Contents