For Your Safety; Testing The Alarm Function; Range Alarm; Battery Alarm - Aastra IntelliGate 630d User Manual

For your safety

■ Testing the alarm function

You can trigger a predefined test alarm to check whether the phone signals the alarms to the
alarm system and whether the system recognises the alarm signals and processes them.
This function is only available with an ATASpro licence. Contact your system administrator for
more information.
Note:
Always trigger a test alarm when you begin your shift to check that the alarm system is operational.
Repeat the test at regular intervals.
Settings
Sensor alarm
Transmit test alarm

■ Range alarm

The phone can only send the alarm messages if it is within the radio area. So it is important to
activate the Range alarm
leave the radio area (see chapter

■ Battery alarm

For safety reasons make sure that the batteries are always loaded (see chapter
battery", page 75).
When the alarm server mode is activated, an alarm is triggered as soon as the battery is below
20 %.
Aastra 630d
Press the navigation key to the right or the
Scroll to Settings and press the
Scroll to Sensor alarm and press the
Scroll to Transmit test alarm
➔
Test alarm is sent to the alarm system. Depending on the configuration of
the alarm system, the alarm system triggers a test alarm and signals it on
your phone.
so that you are notified acoustically by the phone if you are about to
"Activating range alarm and system busy
Menu softkey.
Select softkey.
Select softkey.
and press the Select softkey.
Alarm
beep", page 45).
"Charging the
71