Aastra IntelliGate 630d User Manual page 45

<PIN>
Free
■ Activating range alarm and system busy beep
You want to set the system parameters with your cordless phone.
The Range alarm indicates that the connection between your phone and the system is weak.
You can set the phone so that you receive a warning signal if you leave the coverage area
• You are making a call and are getting near the limit of the radio area: A warning signal
sounds in the loudspeaker and the LED indicator is flashing red. If you leave the radio area,
the call is disconnected.
• The phone is in standby mode and you leave the radio area (only for phones on an alarm sys-
tem, see chapter "Alarm", page 61): The phone warns you by means of a continuous ringing.
After acknowledging this continuous ringing, it will be again triggered after approx. one
minute.
The System busy beep
is available again.
Settings
General
<Setting>
Aastra 630d
Enter the PIN and confirm with the
Scroll to Free and confirm with the
➔
The phone is unlocked.
➔
To lock all your phones, execute the *33* <PIN> # function code (see
"User's Guide */# Procedures").
tells you that the system is overloaded – you need to wait until the system
Press the navigation key to the right or the
Scroll to Settings and press the
Scroll to General and press the
Select the setting you want and switch on or off with the
Personalizing Your Phone
Ok softkey.
Select softkey.
Menu softkey.
Select softkey.
Select softkey.
Select softkey.
45