D-Link DVG-6004S User Manual page 29

FXO Caller ID Detection: To detect the Caller ID delivered from PSTN to the FXO port.
While enabled, the Caller ID detected on the FXO port will be send to the SIP Proxy Server
on dialing out calls.
Detection Level: The gain volume occurs on Caller ID detection.
Note: You have to enable "Wait for Caller ID before FXO / Trunk pick up" to ensure Caller ID
is detected correctly.
FSK Caller ID Type: Select FSK type. In most cases, Bellcore is preferred in North America
and ETSI in Europe.
Anonymous Caller ID (CLIR): When enabled, the caller's phone set will not display your
number.
Note: If you register the gateway to a Proxy, you may be unable to make a call. This is due
to the fact that the gateway doesn't send the number for authorization.
Anonymous Transit in W/O Caller ID: FXO won't detect caller ID, and the gateway will dial
out with anonymous caller identification. If the call needs caller ID to be identified for Proxy,
Proxy will reject this call without caller id.
Trunk Incoming Prompt Voice: Select the greeting (must use the IVR 132 function to record
a voice file) when FXO receives an inbound call.
Upload Greeting: It is able to upload the recorded voice file. The format must be G.723.
FXO Hunting VoIP call in option: To set FXO dial-out mode by using the default setting or
waiting caller to dial out when the VoIP call calls FXO hunting number.
FXO Hunting Default Dial-Out: To set FXO default dial-out number.
FXO Line VoIP call in options: To set FXO dial-out mode when the VoIP call indicates the
FXO extension number.
Enable: Enable a line; if some lines are not used, disable them (Pause Function) to avoid
unnecessary waiting when an incoming call is diverting to this line.
Hotline Functions
27