Line Settings - D-Link DVG-6004S User Manual

Enable Out-of-Band DTMF: To send DTMF keys (0~9, *, #,) follow the RFC2833 rules or via
SIP Info.
Enable Hook Flash Event: The gateway will deliver the flash signal to remote party via
RFC2833 or SIP Info.
Payload Type：Payload type of RFC2833.
Uses Second CPT for VoIP Call: This function is usually applied when the user selects VoIP
as the primary path for outgoing calls and PSTN as the backup. By enabling this function,
the gateway will generate a different set of tones to inform the user that VoIP is in service.
Should VoIP fails and fallback to PSTN, the user will hear PSTN tones instead of the
second set CPT. (for CPT related settings, please refer to Trunk Management -> CPT
Settings)

Line Settings

Listening Volume: Adjusts the hearing volume.
Speaking Volume: Adjusts the speaking volume.
Tone Volume: Adds a new option to make tone volume adjustable. This setting will be
applied to all tones generated by the gateway including Dial Tone, Busy Tone, and so on.
Flash Time: Used to set the time frame that FXO generates a FLASH signal.
Enable Polarity Reversal: This option forces the gateway to detect the reversal of polarity
on FXO port as the primary signal to drop a call. Some telephone switches or PBX reverse
the line polarity to inform the remote end to drop an ongoing call. Please consult with the
telephone service provider for availability of this feature.
PSTN Answer Detection: This is only used with ITSP.
PSTN Ring OFF Length: FXO/PSTN make out if the call from PSTN hangs up before FXS
answer the call. ※