Table of Contents
Advertisement
b. Enter Super user login and password for Authentication (default : super/pass)
c. Click Setup Device. If super login was authenticated, it'll show "Successfully
configured device". Otherwise it'll show "Permission Denied".
Install JVM on Client system
IP-KVM switch was accessed using a standard JAVA enabled web browser. You must install Sun
JVM 1.4.2 or above to your client system.
Note: At a minimum you must have Internet Explorer 6.0 or Netscape 7.0 or Molliza 1.6 (and
above) installed on your client computer.
Connect IP-KVM switch via Web
Using the HTTP protocol or a secure encrypted connection via HTTPS and entering the
configured IP address of IP-KVM switch into your web browser to connect IP-KVM switch.
The factory default settings are:
Username
Password
super
pass
9 / 92
8/16-Port KVM over IP Switch
Advertisement
Table of Contents
