P-Link Computer KVM-MU108AP User Manual page 17

8/16-Port KVM over IP Switch
Before installation, please make sure all of peripherals and computers have been turned off. This
example of installation is based on 8 port Rack Mount PS/2 IP-KVM switch and you also can think
that 16 port Rack Mount PS/2 IP-KVM switch and 32 port Rack Mount PS/2 IP-KVM switch have
the same installation procedure. In order to connect the PS/2 IP-KVM switch to the host system,
please perform the following steps:
Step 1
Power down your computer and IP-KVM switch
Step 2
Connect the power supply to IP KVM switch and plug the other end into an electrical receptacle.
Step 3
Find a convenient place to put your PS/2 IP-KVM switch. Its 19" rack mount form factor makes it
ideal mountable on 19" rack. When mounting to a rack, attach the included brackets to the sides
of the PS/2 IP-KVM switch. Take note of the length of your cables so that your computers, KVM
Switch, keyboard, mouse and monitor are distanced properly.
17 / 92