dd [ if=/dev/cdrom ] [ of=/tmp/cdrom.image ]
dd reads the entire disc from the device /dev/cdrom, and saves the output in the specified
output file /tmp/cdrom.image. Adjust both parameters exactly to your needs (input device
etc.).
MS Windows
To create the image file, use your favorite CD imaging tool. Copy the whole contents of the
disc into one single image file on your hard disk.
For example, with "Nero" you choose "Copy and Backup". Then, navigate to the "Copy Disc"
section. Select the CD ROM or DVD drive you would like to create an image from. Specify the
filename of the image, and save the CD ROM content in that file.
Figure 6-13. Nero selection dialog
53 / 92
8/16-Port KVM over IP Switch