P-Link Computer KVM-MU108AP User Manual page 68

8-port/16-port ps/2 kvm over ip switch
Table of Contents

Advertisement

Subnet Mask
The net mask of the local network.
Gateway IP address
In case the IP-KVM switch should be accessible from networks other than the local one,
this IP address must be set to the local network router's IP address.
Primary DNS Server IP Address
IP address of the primary Domain Name Server in dot notation. This option may be left
empty, however the IP-KVM switch will not be able to perform name resolution.
Secondary DNS Server IP Address
IP address of the secondary Domain Name Server in dot notation. It will be used in case
the Primary DNS Server cannot be contacted.
Remote Console And HTTPS port
Port number at which the IP-KVM switch's Remote Console server and HTTPS server are
listening. If left empty the default value will be used.
HTTP port
Port number at which the IP-KVM switch's HTTP server is listening. If left empty the
default value will be used.
Telnet port
Port number at which the IP-KVM switch's Telnet server is listening. If left empty the
default value will be used.
Bandwidth limitation
The maximum network traffic generated through the IP-KVM switch ethernet device.
Value in Kbit/s.
Enable Telnet access
Set this option to allow accessing the IP-KVM switch using the Telnet
Gateway see the section 6.1.2.
Disable Setup Protocol
Enable this option to exclude the IP-KVM switch from the setup protocol. Setup protocol
is a proprietary layer-2 MAC-based protocol to allow some configuration software to
detect IP-KVM devices in the network, even without IP address, and then config network
related settings to IP-KVM switch..
LAN Interface Settings
The "Autodetect" will set the ethernet speed to the fastest possible value supported by
both endpoints of the link. For example, if you use a 10M/half duplex HUB, this speed will
be auto-selected. If this option does not work with some network device (HUB, switches,
and routers), you can set the Ethernet interface speed of IP-KVM switch manually to the
values as supported by the network device.
68 / 92
8/16-Port KVM over IP Switch

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kvm-mu116ap

Table of Contents