P-Link Computer KVM-MU108AP User Manual page 19

Step 8
Double-check all of the connections. You can check the color of keyboard and mouse connector
to make sure the keyboard and mouse cables go to the correct ports.
Step 9
Repeat step 5 to 7 for the remainder of the computers.
Step 10 (Option)
Connect the type A connector of USB A-B cable to the USB port of the host system, while using remote
mass storage control. USB type A plug of USB A-B cable to the computer.
Step 11
Connect the Ethernet and/or modem, ISDN, depending how you want to access PS/2 IP-KVM
switch.
The rear side of PS/2 IP-KVM switch provides a RJ-45 connector for Ethernet. The connector is
used either for a 100 Mbps 100BASE-TX connection or for a 10 Mbps 10BASE-T connection. The
INTERNET
Mode
19 / 92
8/16-Port KVM over IP Switch