P-Link Computer KVM-MU108AP User Manual page 50

The following information has to be given to mount the image properly:
Share host -- The server name or its IP address.
Share folder name -- The name of the share folder to be used.
Image file name -- The name of the image file on the share folder.
User name -- If necessary, specify the user name for the share named in advance. If
unspecified, and a guest account is activated, this guest account
information will be used as your login.
Password -- If necessary, specify the password for the given user name.
To register the specified file image and its location click on the button "Set".
The specified image file is supposed to be accessible from the IP-KVM switch. The
information above has to be given from the point of view of the IP-KVM switch. It is important
to specify correct IP addresses, and device names. Otherwise, IP-KVM switch may not be
able to access the referenced image file.
Furthermore, the specified share has to be configured correctly. Therefore, administrative
permissions are required. As a regular user you may not have these permissions. You should
either login as a system administrator (or as "root" on UNIX systems), or ask your system
administrator for help to complete this task.
Windows 2000/XP
Open the Explorer, navigate to the directory (or share), and press the right mouse button
to open the context menu.
Figure 6-9. Select Windows Share
50 / 92
8/16-Port KVM over IP Switch