Creating An Image - P-Link Computer KVM-MU108AP User Manual

Creating an Image

Floppy Images
UNIX and UNIX-like OS
To create an image file, make use of "dd". This is one of the original UNIX utilities and is
included in every UNIX-like OS (UNIX, Sun Solaris, and Linux).
To create a floppy image file, copy the contents of a floppy to a file. You can use the following
command:
dd [ if=/dev/fd0 ] [ of=/tmp/floppy.image ]
dd reads the entire disc from the device /dev/fd0, and saves the output in the specified
output file /tmp/floppy.image. Adjust both parameters exactly to your needs (input device etc.)
MS Windows
You can use the tool "Raw Write for Windows". It is included on the CD ROM shipped with
IP-KVM switch.
Figure 6-12. RawWrite for Windows selection dialog
From the menu, select the tab "Read". Enter (or choose) the name of the file in which you
would like to save the floppy content. Click on the button "Copy" to initiate the image creation
process.
For related tools you may have a look at
CD ROM/ISO Images
UNIX and UNIX-like OS
To create an image file, make use of "dd". This is one of the original UNIX utilities and is
included in every UNIX-like OS (UNIX, Sun Solaris, and Linux).
To create a CDROM image file, copy the contents of the CDROM to a file. You can use the
following command:
www.fdos.org
52 / 92
8/16-Port KVM over IP Switch