5.14.1
PTZ Connection
Connect DVR/DVS RS-485 port Pin "T+" with PTZ Pin "A".
Connect DVR/DVS RS-485 port Pin "T-" with PTZ Pin "B".
If DVR/DVS RS-485 port is RJ45 interface, please refer to DVR/DVS user manual
about RS-485 pin definition.
5.14.2
PTZ Settings
You can setup RS-485 parameters to match your PTZ protocol. In main menu, move
"Active Frame" to PTZ menu item and press [ENTER] key, you can enter into PTZ menu
as following:
PTZ menu description
Select channel: Select one PTZ camera.
RS-485 parameters: Including baud rate, data bit, stop bit, parity, flow control, etc.
98