Preset Setup; Ptz Control - Jaycar Electronics DS-8704HI-S User Manual

5.14.3

PTZ Control

In "Preview" mode, press [PTZ] button on DVR front panel, you can enter into PTZ
control mode.
For example, above screen is in camera01 PTZ control mode. Press
[UP][DOWN][LEFT][RIGHT] buttons, DVR will check camera01 PTZ protocol and will
send corresponding PTZ control commands through RS-485 port.
5.14.4

Preset Setup

Preset is using one number to represent the camera's position, zoom, focus and
iris. Move "Active Frame" to "Setup" button on the right side of "Preset" item, press
[ENTER] key to enter into preset setup menu. You can save 128 preset numbers. Please
make sure the PTZ support preset function before you setup preset.
100