Ptz Control - Jaycar Electronics DS-8704HI-S User Manual

4.4

PTZ Control

Note: The user must have the "PTZ control" right. Please refer to "PTZ Setup"
in chapter 5.14.
PTZ control interface
In preview mode, press [PTZ] key, in the login dialog, select one user name and input
the correct password, you can enter into PTZ control interface.
In menu mode, press [PTZ] key, you can enter into PTZ control interface directly.
There is "PTZ Control" prompt in the PTZ control interface. The displayed camera
name means which channel's PTZ is under control. For example, "Camera 01" means you
st
are controlling the 1 camera PTZ.
Select channel
In PTZ control mode, you can press numeric keys to select channel. If DVR has less
than 10 channels, press one numeric key to select. For example, press [2] key to select
nd
2 camera PTZ. If DVR has 10 or more than 10 channels, you must press two
numeric keys to select. For example, press
press [1] [2] to select 12
th
camera PTZ.
33
nd
[0] [2] to select 2 camera PTZ, and