5.13 Network Setup
If you want to get access to DVR via network, you must setup network parameters.
Note: If any network parameter is modified, you must save and reboot DVR to make it
into effective.
In main menu, move "Active Frame" to "Network" icon and press [ENTER], you can
enter into "Network" menu as following:
5.13.1
Network Basic Settings
IP: This IP address must not be conflict with other IP. If there is DHCP server in
network, you can set the IP as "0.0.0.0", save and reboot DVR. In reboot process, DVR
will search the DHCP server and get one dynamic IP address. This item will display the
dynamic IP address. If DVR uses PPPoE function, also DVR can dialup into internet and
this item will display the dynamic internet IP address.
Port: Network access port number, must be greater than 2000.
Mask: This is sub net mask.
Gateway: The gateway IP is used to communicate in different network segments
93