Pppoe Function - Jaycar Electronics DS-8704HI-S User Manual

5.13.4

PPPoE Function

Enter into DVR "Network" menu, press "PPPoE" setup menu:
Step 1: Enable "PPPoE" option
Step 2: Input PPPoE username which is from ISP
Step 3: Input PPPoE password which is from ISP
Step 4: Input PPPoE password again
Step 5: Save parameters. In "PPPoE" menu, press "Confirm" to save parameters,
press "Confirm" again in "Network" menu. Reboot DVR to make parameters into effect. In
reboot process, DVR will start dialup using PPPoE parameters. If DVR dialup internet
successfully, DVR will display the dynamic internet IP address in "Network" menu.
95