Motion Detection Alarm - Jaycar Electronics DS-8704HI-S User Manual

5.9

Motion Detection Alarm

If you enable this function, when there is motion detected, DVR will make alarm.
Step 1: Enter into "Image Setup" menu:
Step 2: Select camera: Use [] [] key to select one camera.
Step 3: Select motion detection sensitivity: On the right side of "Motion Det. Level"
item, there is a list box. That is motion detection sensitivity. There are 7 options, from 0
(the lowest) to 5 (the highest) and "Off". You can use [] [] keys to select one. If you
select "Off" option, DVR will not response even if there is motion detection. If you select
other options, "Motion Area Setup" button and "Policy Setup" button will be active. If you
select low sensitivity such as 0, only when there is great motion detection, DVR can
response. On the other side, for high sensitivity such as 5, DVR will response with small
motion detection. The default sensitivity is 2.
Step 4: Motion area setup: You must define motion areas so that DVR will response
when there is motion in those areas. Move "Active Frame" to "Area" button on the right
side of sensitivity list box, press [ENTER] key, you can enter into "Motion Area Setup"
76