View Tampering Alarm - Jaycar Electronics DS-8704HI-S User Manual

5.7

View Tampering Alarm

If you enable this function, when someone blocks the camera spitefully, DVR will
make warning alarm.
Step 1: Enter into "Image Setup" menu:
Step 2: Select camera: Please use [] [] keys to select one camera.
Step 3: Enter into "Advanced settings" setup menu:
Select sensitivity: You can use [] [] keys to select the sensitivity for "View
Tampering" item. The sensitivity options are: Low, Normal and High. Selecting one of them
will active "Area Setup" and "Policy Setup" functions.
Step 4: View tampering area setup: Move "Active Frame" to "Area" button, press
[ENTER] key to enter into area setup interface. The setup methods are same as that of
mask area setup. After setting up the area, press [ENTER] key to return "Image Setup"
menu. You can press [ESC] key to abort.
Only one view tampering area can be setup.
Step 5: View tampering alarm setup In "Advanced settings" menu, move "Active
Frame" to "View tampering policy" button, press [ENTER] key to enter into "View
Tampering Handle" menu:
72