Recording Setup - Jaycar Electronics DS-8704HI-S User Manual

5.11 Recording Setup

In main menu, there is an icon named "Recording". You can enter into recording
menu as following:
Recording menu description:
Select Camera: Here all channels are listed. You can use [↑][↓] keys to select one.
Enable eventPara: Enable this function can set two types of recording parameters.
When event happens, the record parameters will be changed.
Stream Type: There are two options, one is "Audio&Video" stream and the other is
"Video" stream only. If you want to record video and audio, please select "Audio&Video"
option, otherwise you can select "Video" option to record only video.
Note: If you change this option, please reboot DVR to make parameter into effective.
Resolution: The higher resolution is, the clearer the image is. The resolution options
from low to high are: QCIF, CIF, 2CIF, DCIF, 4CIF.
For DS-8700HI series DVR: Can support QCIF/CIF/2CIF real time recording,
DCIF@15FPS, 4CIF@12FPS recording.
Note: If you change this resolution option, please reboot DVR to make it into effective.
Bit Rate: For different resolution, different frame rate, you can select different bit rate.
The bit rate value has following options (bps): 32K, 48K, 64K, 80K, 96K, 128K, 160K,
192K, 224K, 256K, 320K, 384K, 448K, 512K, 640K, 768K, 896K, 1M, 1.25M, 1.5M, 1.75M,
83