Setting Up Screen Call - Sanyo SCP-3200 User Manual

Setting Up Screen Call

This feature enables you to screen incoming calls by using a recorded
announcement, either one that is pre-recorded or one that you record.
You can also record the caller's message into the Voice Data list.
Activating Screen Call
To start Screen Call when you have incoming calls:
When the phone rings or vibrates, press Options (right softkey)
> Screen Call.
To set auto Screen Call:
1.
Select
2. Select On.
3.
Set the answering time by using numeric keys or by pressing the
navigation key up or down.
4. Press OK (left softkey). (The
display.)
Tip:
While the caller's message is being recorded, press
or press to stop recording and disconnect the call.
Selecting a Screen Call Announcement
To select a Screen Call announcement:
1.
Select
2. Depending on your preference, select Pre-Recorded or Custom.
> Tools > Voice Memo > Screen Call > Auto.
> Tools > Voice Memo > Screen Call > Announcement.
icon is displayed on the standby
9. Voice Services
to answer the call,
87