Push 2 Talk; Starting Push 2 Talk - Sanyo SCP-3200 User Manual

12. Push 2 Talk

Push 2 Talk allows you to enjoy quick, two-way, "walkie-talkie-style"
communication with your friends, family, and co-workers. You can
make 1-to-1 or 1-to-many calls (up to 5 others on the same call) to any
other Push 2 Talk user, anywhere on the Network. You can make and
receive Push 2 Talk calls when your phone displays or
Note:
Enabling Push 2 Talk affects the phone's talk and standby times.

Starting Push 2 Talk

Setting Push 2 Talk Mode
1.
Select
Disable. (The default setting is Disable.)
Push 2 Talk Call Alerts
There are several ways your phone alerts you during Push 2 Talk calls.
When you make or receive a Push 2 Talk call:
The phone beeps (depending on the Ringer Type).
The backlight illuminates.
The screen displays a Push 2 Talk call message.
The other party's Push 2 Talk number and name (if available) are
displayed.
The screen displays who has the floor.
The status of a Push 2 Talk call:
The Green LED On indicates you have the floor and may speak.
The Red LED On indicates another contact has the floor.
The LED Off indicates the floor is open. (You can take the floor
and speak by pressing and holding the Push 2 Talk key (
the left side of your phone.)
106 12. Push 2 Talk
> Settings > Push 2 Talk > Enable/Disable > Enable or
Enable to make or receive Push 2 Talk calls any time your
phone is not in use.
Disable to disable your phone's Push 2 Talk service; you will
not be able to make or receive Push 2 Talk calls or access
your Push 2 Talk Contacts entries.
.
) on