Contacts Entry Options; Adding A Phone Number To A Contacts Entry - Sanyo SCP-3200 User Manual

Contacts Entry Options

To access a Contacts entry's options, select an entry and press
Then highlight a phone number and press Options (right softkey).
Edit to edit the selected entry.
Call to dial the selected number.
Call:Speaker On to dial the phone number in speakerphone mode.
Send Message to send a text message or a picture message.
(See page 91 or 102 for details.)
Call Alarm to set a call alarm for the entry. (See page 71 for Call
Alarm.)
Set Speed Dial to assign speed dial numbers to your favourite
entries. (See "Assigning Speed Dial Numbers" on page 64.)
Set Voice Tag to set a voice dial for the entry. (See "Using Voice-
Activated Dialing" on page 81.)
Prepend to add a number prefix to the beginning of the entry. (See
"Prepending a Phone Number From Call History" on page 58.)
Copy to Prsnl to copy the phone number to your Push 2 Talk
Personal List (only appears when Push 2 Talk mode is set to
Enable and the number does not match any stored entry in your
Personal List).
Send Contact to send a Contacts entry in the Contacts via
Bluetooth. (See page 123.)
Tip:
You can view the next entry by pressing the navigation key right or view the
previous entry by pressing the navigation key left.

Adding a Phone Number to a Contacts Entry

To add a phone number to an entry:
1.
Display your Contacts list. (See "Displaying the Contacts List"
on page 59.)
2.
Select the entry you wish to add a phone number to and
press
3. Highlight a phone number and press Options (right softkey) >
Edit; or if you are selecting an item other than the phone
number, press Edit (right softkey).
62 7. Using Contacts
.
.