Plu - Uniwell SX-330 Operation Manual

5. PLU

There are three ways to enter a PLU;
1. Bar Coded PLUs which are the PLUs programmed for registration by a scanner.
Procedure: Scan the bar code printed on each item while the control key is at R position.
2. H.PLU keys are the keys allocated to the keyboard. Up to 99 keys are availa ble.
Procedure: Press one of H. PLU keys while the control key is at R position.
3. Code Entry PLUs are any PLUs not allocated to a key on the keyboard.
Procedure: Enter the code for the PLU by using Ten-Keys and then press PLU key while
Note: When a PLU having more than 16 characters of PLU descriptor is registered, 16 characters are
shown on the display first, and the remaining characters are shown by X2 key depression.
R
--- scan the PLU
R
---
the control key is at R position.
R --- PLU code ---
HARD
PLU
PLU
REPEAT
24