Tandy DCM-7 Operation Manual page 34

Hayes protocol mode operation
Automatic logon •
1. At the TELECOM-STATUS screen, press (§)to create an autolog file
and enter your log file name, then press (
ENTER ) •
Press (ED to create
the STATUS line. After selecting the parameters, press
(F12)
to return
to the original screen and complete the rest of file. When completed,
the screen for your autolog file might show:
STATUS:Y,30,8, N, 1,0N,OFF,OFF,OFF,O
CALL: 123-4567 (Use your local TELENET number.)
PAUSE:S
SEND: AM''M
RECV: TERMINAL=
SEND: D1"M
RECV:
@
SEND: C 60942"M
RECV: ????
SEND: DJNS"M
2. Press (
F12) (ENTER )
to save this autolog file and return to the
TELECOM-STATUS screen.
3. Input
@
filename
(ENTER )
to execute your autolog file. When the
logon sequence is entered correctly, the DCM-7 will dial your local ac-
cess number' connect to the service, then automatically execute the rest
·or
the autolog file.
28