Page 6
If you have not already connected the DCM-6 to your computer system, refer to Appendix A, Settin g up the DCM-6. Before you begin using your Modem, find out the communications conventions of the computer or modem with which you are going to communicate.
Page 10
Figure 3. Modular Wall Telephone Connection Figure 5. Wall Connection If you will be using your DCM-6 outside the USA, you may need a modular-to-modular cable (279-374) and a duplex modular jack 4. Or, use the optional acoustic cups (see next section) to make the (279-357).
Just connect the DIN connector of the acoustic cups to the humidity. acoustic coupler jack of the DCM-6, as illustrated in Figure 6. For further information, refer to the acoustic cup's owner's manual. Check the cables and connections periodically. The most common cause of problems is a bad telephone connection.
Need help?
Do you have a question about the DCM-6 and is the answer not in the manual?
Questions and answers