Syslog Configuration; Config Setting - Fanvil FV6030 User Manual

Syslog server receives the messages from clients, and classifies them based on priority and type.
Then these messages will be written into log by some rules which administrator can configure.
This is a better way for log management.
8 levels in debug information:
Level 0---emergency: This is highest default debug info level. You system can not work.
Level 1---alert: Your system has deadly problem.
Level 2---critical: Your system has serious problem.
Level 3---error: The error will affect your system working.
Level 4---warning: There are some potential dangers. But your system can work.
Level 5---notice: Your system works well in special condition, but you need to check its working
environment and parameter.
Level 6---info: the daily debugging info.
Level 7---debug: the lowest debug info. Professional debugging info from R&D person.
At present, the lowest level of debug information send to Syslog is info, debug level only can be
displayed on telnet.
Field name
Server IP
Server Port
MGR Log Level
SIP Log Level
IAX2 Log Level
Enable Syslog

4.3.5.3. Config Setting

Syslog Configuration

Set Syslog server IP address.
Set Syslog server port.
Set the level of MGR log.
Set the level of SIP log.
Set the level of IAX2 log.
Select it or not to enable or disable syslog.
- 48 -
explanation