Special Function Key - Fanvil FV6030 User Manual

or press Soft2 (Detail) to check the details of this record, then press Soft2 (Dial) again to change
the current number. Pressing Soft2(Dial) will call this number directly if user don't modify the
number. If there is no missed call, screen will show "List Is Empty".
Incoming call
Press and switch the menu to "Incoming Call" by pressing
Soft2 (Enter), phone will show the number of incoming call. User can also use
browse the incoming call records; or press Soft2 (Detail) to check the details of this record, then
press Soft2 (Dial) again to change the current number. Pressing Soft2 (Dial) will call this number
directly if user don't modify the number. If there is no incoming call，screen will show "List Is
Empty".
Dialed call
Press , and use
Soft2 (Enter), phone will show the number and time of dialed call. User can also use
to browse the dialed call records; or press Soft2 (Detail) to check the details of this record, then
press Soft2 (Dial) again to change the current number. Pressing Soft2 (Dial) will call this number
directly if user don't modify the number. If there is no dialed call, screen will show "List Is
Empty". User can also press

3.9. Special function key

Function key
If function key is set as SIP Line key, user can select which lines will be used to make call when
dialing or make a 2nd dialing by this function key. Note that only the key which is registered is
available to be select to call.
This function key can be configured as "Key Event", namely set as F_MWI. It can set relative
keys as Voice mail key, can check new and old voice mail; also can be set as
F_DND/F_FBOOK/F_CFWD/F_REDIAL/F_CALLERS, etc.
User can implement BLF/PRESENCE/MWI/SPEED DIAL features by Memory Key.
/b Busy Lamp Field: Based on Asterisk, it can be used to check the status (Idle,ring,busy) of
the pointed phones. It is helpful to operator to know the status of the phone which he will switch
to.
User can configure the BLF like: 300 is rogatory number, @1 means SIP1, of course, user can
configure as @2(SIP2); if don't use this, simply says 300/b, it will use SIP1 as default. /b means
to select to "Outgoing Call". Press
to check "Outgoing Call".
- 15 -
. Press
to